Silent Features of Sparkler Filter Press and Zero Hold up Filter Press

Both sparkler filter and zero hold up filter presses are used to solid liquid separation. The constructions of both machines are same.  But they have different working mechanism. The sparkler filter press is also known as horizontal filter press because there are horizontally arranged plates in filter cartridge assembly. The zero hold up filter press known as reverse flow zero hold up filter press because it works in reverse manner compare to sparkler filter press. The machines have some important parts used in filtration process are as follows.

Filter Media – The area which collects the impure liquids

Liquor – The solution containing liquid and solids

Pump – Used to feed the slurry into filter press

Cake – The solids filtered out of the liquid

Sparkler Filter Press

Features of Sparkler Filter Press:

• The sparkler filter press stops water loss, corrosion, leak and waste getting out of from product.
•  The filter plates are available in two sizes: Deep and Shallow
• Deep plates are for large percentage of cake holding capacity and shallow plates are for small percentage of cake holding capacity.
• The horizontal plates are used to prevent the cake dropping as well as cracking, thus assuring better filter quality.
• The filtration area and cake holding capacity can be increased or decreased as per requirement.
• Give crystal clear filtration by filtering particles up to 1 micron size.
• Cake can be dried either by compressed air or by insert gas, steam.

Features of Zero Hold up Filter Press:

Zero Hold up Filter Press

• Finish filtering system of the set without any holdup due to opposite circulation of fluid hence large saving in time and cost.
• Back clean service can be provided for ongoing functions.
• Single pass filtration with no solid bypass
• No scavenger agreement needed.
• The cake, filter aid and solids remain totally enclosed allowing filtration of toxic, hazardous and explosive liquids.

Look at the different Zero Hold up Filter Press.

Both of these filter presses are used in pharmaceutical industry, chemical industry, food processing industry, cosmetic industry and beverages industry.

Working of Plate and Frame Filter Press

Plate and Frame Filter Press

Working:

The plate and frame filter press is manufactured using high quality stainless steel and material. It is designed to remove the liquids from liquid solid slurry and particularly suitable for low solids. The structure of plate and frame filter press is fully designed with pump and pipe lines connected with each other. The liquid is entered at the bottom of the press with giving pressure using pump. The liquids travel the path which has filter media inserted between the plates. There is a gap between plates and now it is filled with liquid slurry, as the liquids passes through the filter media and travels up to outlet port of the press. This liquid is pure and the solid remains between the plates.

This type of filter press machine is used to filter the thin liquids like wine, chemicals, solvent liquids and many more. The machine is widely used in pharmaceutical industry, chemical industry, food processing industry, cosmetic industry and beverages industry. These all industries manufactured liquid solid slurry and they need to filter their product and make it pure to use. The large plate and frame filter press machine has plate shifters to move the plates. The solid between the plates is removing by giving blow with pumps.

Technical Specification:

The machine is available in different models which have different size of plates and frames. The filter plates can increase with N number of plates. The filtered liquid stored in cake which can also increase as per volume of the liquids. The most used size of filter plates are 20 X 20, 40 X 40 and 60 X 60 in cm X cm.

Features:

Perform two stages filtration

It is suitable for large volume of solids

It is also known as recess plate type filter press

It is available in fixed and moving body

Main Application Areas:

In pharmaceutical industry specially for thin liquids

In chemical industry for syrup, solvent liquid

In food processing industry for sugar filter

In beverages industry for wine filter

Introduction of Sparkler Filter Press

Construction

The sparkler filter press is made with high quality stainless steel. The top part of machine has covered using bolts. This part is used to create and maintain the pressure on filter press. There is a filter cartridge assembly inside the shell and it consists of several horizontally arranged disc type filter plates. So, the machine is also called horizontal filter press. The plates consists perforated supporting screens, filter media, interlocking cups. The whole machine is constructed with pump and pipe lines and stands on stainless steel trolley.

Working

In this filter press, the impure liquid is fed from bottom inlet with high pressure and it arrives into central part of the machine. The liquids go to top of each plate and the filter plates clear the liquids. The clear filtrate then flows to the outlet. With this machine you can get 100% filtration of liquids which not so with standard flow type.

Features

GMP model mounted on stainless steel trolley
Available with different diameter with N number of plates
Manufactured using high quality materials
Filter plates are available in two sizes : Deep and Shallow
The filtration area can be increased and decreased

Useful for

Pharmaceutical Industry
Chemical Industry
Food Processing Industry
Beverages Industry
Oil Industry
Dairy Industry
Paint Industry